Products
China Professional Factory Provide High Precision 1204 Ball Screw For Cnc 3d Printer
1204 ball screw--Products Description
1. Process :Cold rolled ball screw;
2. Ball screw material :Gcr15 material;
3. Preciison C5 precision;
4. Quality as good as TBI brand is high precision, long life use.
5. Pay more attention to before-sale, in-sale, after -sales service.
6. Lead time ：Manufacturer with large stock & short delivery
Product description :
| Preciison : | C7,C5,C3 |
| Diameter: | 12mm,16mm,20mm,25mm,32mm,40mm,50mm,63mm,80mm |
| Standard Model | SFU/DFU/SFI/DFI /SFS/SFNU/SFY/SFE |
| Certification: | ISO9001, SGS, CTI, ROHS |
| Pitch 4mm: | SFU1204 |
| Pitch 5mm: | SFU1605, sfu1605 ball screw，SFU2005, SFU2505, SFU3205, SFU4005, SFU5005 |
| Pitch 10mm: | SFU1610, SFU2010, SFU2510, SFU3210, SFU4010, SFU5010, SFU6310 |
| Double nut: | DFU1605, DFU2005, DFU2505, DFU3205, DFU3210, DFU4005, DFU4010, DFU5010, DFU6310, |
| Big pitch | SFE1616, SFE1632, SFE2020, SFE2040, SFE2525, SFE2550, SFE3232, SFE3264, SFE4040, SFE5050 |
Ball screw--sfu1605 ball screw is one of the common mechanical parts. Its main function is to convert the rotary motion of the motor into linear motion. Generally speaking, the length of the ball screw-sfu1605 ball screw is greater than the stroke required for movement, so that the ball screw can reciprocate within the safe stroke.
1. The ball screw - sfu1605 ball screw must be kept clean and protected with anti-rust oil. Special attention should be paid not to allow sharp objects or tools to hit the tooth surface and not to allow any iron filings to enter the inside of the nut; and when assembling the shaft The outer diameter of the end should not be damaged by collision or scratches.
2. Select a ball screw with a suitable accuracy level and install it according to the standard assembly procedures.
3. To make the ball screw reach the maximum service life, sfu1605 ball screw grease must be kept filled on the steel balls and ball grooves. Either the oil bath type or the dripping type oiling method can be used, but direct oiling into the nut is better.
4. Pay special attention when installing the ball screw - sfu1605 ball screw on the machine. Do not knock the nut or bent pipe. At the same time, do not allow the nut to separate from the screw or over-travel - part of the nut's stroke leaves the screw. If so, it will Cause the steel ball to escape from the ball groove.
5. Choose a suitable shaft end support bearing combination. On CNC machine tools, it is recommended to use bevel bearings (bevel angle: 60°).
Product advantage :
SFU series ball screw Specification
Our factory
Tianjin Dingtai Sheng Transmission Technology Co., Ltd. is a factory specializing in the production of mid-to-high-end ball screw. It has accumulated more than 30 years of rich experience and covers an area of more than 50,000 square meters.
